The IT Law Wiki
Register
No edit summary
No edit summary
 
(5 intermediate revisions by the same user not shown)
Line 1: Line 1:
  +
== Definition ==
{{stub}}
 
   
  +
A '''buffer''' is
   
  +
{{Quote|a block of [[memory]] that temporarily holds [[data]] and allows the [[data]] to be read or written in larger chunks to improve a [[computer]]’s performance. The buffer is used for temporary [[storage]] of [[data]] read from or waiting to be sent to a [[device]] such as a [[hard disk]], [[CD-ROM]], [[printer]], or [[tape drive]].<ref>[[Electronic Crime Scene Investigation: A Guide for First Responders]], at 50.</ref>}}
A '''buffer''' is [[memory]] that temporarily holds [[data]]. Buffers are used to offset differences between the operating speeds of different devices, such as a [[printer]] and a [[computer]].
 
   
  +
== Overview ==
  +
  +
Buffers are used to offset differences between the operating speeds of different devices, such as a [[printer]] and a [[computer]]. Buffers are used for many purposes, such as (a) [[interconnect]]ing two [[digital]] circuits operating at different rates, (b) holding [[data]] for use at a later time, (c) allowing timing corrections to be made on a [[data stream]], (d) [[data collection|collecting]] [[binary data]] [[bit]]s into groups that can then be operated on as a unit, (e) delaying the transit time of a [[signal]] in order to allow other operations to occur.
  +
  +
== References ==
  +
<references />
 
[[Category:Hardware]]
 
[[Category:Hardware]]
  +
[[Category:Storage]]
  +
[[Category:Computing]]
  +
[[Category:Definition]]

Latest revision as of 17:18, 1 April 2013

Definition[]

A buffer is

a block of memory that temporarily holds data and allows the data to be read or written in larger chunks to improve a computer’s performance. The buffer is used for temporary storage of data read from or waiting to be sent to a device such as a hard disk, CD-ROM, printer, or tape drive.[1]

Overview[]

Buffers are used to offset differences between the operating speeds of different devices, such as a printer and a computer. Buffers are used for many purposes, such as (a) interconnecting two digital circuits operating at different rates, (b) holding data for use at a later time, (c) allowing timing corrections to be made on a data stream, (d) collecting binary data bits into groups that can then be operated on as a unit, (e) delaying the transit time of a signal in order to allow other operations to occur.

References[]